Summary of Contents for SunSynk POCKET POWER STATION 2
Page 1
POCKET POWER STATION 2 Portable Power Bank USER MANUAL Global Tech China Ltd, 3 Floor, Wai Yip Industrial Building. 171 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong. Tel: +852 2884 4318 Fax: +8522884 4816 www.sunsynk.com / sales@globaltech-china.com www.globaltechhk.com Version 3.0 (06/28/2021)
INDEX 1. INTRODUCTION ......................... 3 2. GETTING TO KNOW THE POCKET POWER STATION 2 ............. 3 3. USING THE POCKET POWER STATION 2 ................3 4. TECHNICAL SPECIFICATION ....................4 5. SAFETY ............................5 6. TROUBLESHOOTING ........................ 5 7. FREQUENTLY ASKED QUESTIONS ..................6 8.
1. INTRODUCTION The Pocket Power Station 2 is a power storage device that can hold 300 - 500Wh of power. It is strong and rugged in design and portable in size. It carries two lithium-ion battery packs connected so that both drain in unison with the duration of output power greater than if there was only one battery.
Once the power begins to drain from the Pocket Power Station 2, the three lights (Status LED) will drop to two or one. In the case of the Pocket Power Station 2 Plus, the device will switch from the empty battery to the next full battery and use it up until fully drained.
Do not wash the Pocket Power Station 2 with a corrosive cleaner. Do not puncture or fracture the Pocket Power Station 2 so as to avoid electric shock or electrolyte leakage from the lithium-ion battery(s). Do not attempt to disassemble, modify, or fix the Pocket Power Station 2.
Watts, which is the limit for flying. The battery should be removed, and its terminals taped over. Also, you should place it in a plastic bag. Both Pocket Power Station 2 and battery should be placed in hand luggage only.
Pocket Power Station 2. The below table demonstrates loading for the Pocket Power Station 2, bearing in mind that the maximum load at any one time is 200W.
Remove the Sunsynk Mains Adapter from the box and connect it to a nearby mains supply. Plug the DC jack into the DC input on the input side of the Pocket Power Station 2. Wait for 4-5 hrs or until the 3 LEDs on the output side of the PPS2 are fully light.
12. MANUFACTURER’S WARRANTY TERMS AND CONDITIONS 1) Global Tech China Limited and Sunsynk Limited (from now on “the Company”) now warranty against manufacturing faults of the products for two years under the following terms and conditions: a) The product must be purchased and installed within one of the following countries: The United Kingdom, the Isle of Man, the Channel Islands, South Africa, Zimbabwe, Botswana, Hong Kong, and Australia.
Page 10
6) The decision of the company regarding any issue relating to this warranty statement is final. For more information, training videos, software upgrades, help line, forum please refer to http://www.sunsynk.com - Tech Support (Do not forget to register first on the website). Sunsynk...
Page 11
Tel. HK +852 2884 4318 Fax: +852 2884 4816 Tel. UK +44 151 528 9945 Tel. SA +27 1108 39837 sales@globaltech-china.com Audio Training manuals on Apple Pod Cast and Spotify Full training support, manuals and videos on www.sunsynk.com Website: www.sunsynk.com E-mail: sales@globaltech-china.com...
Need help?
Do you have a question about the POCKET POWER STATION 2 and is the answer not in the manual?
Questions and answers