Table of Contents
Advertisement
USING THE POWER NUTRI™ BOWL
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: If the unit is plugged in and powered
on, but the bowl and blade assembly is not
properly installed, the timer will display - -"
and the motor will be disabled.
NOTE: Auto-iQ® programs have pauses and
changes in speed throughout the cycle.
1
Plug in motor base and place on a clean,
dry, smooth, level surface such as a
worktop or table.
2 Add ingredients to the Power Nutri™
Bowl. DO NOT add liquid past the LIQUID
FILL line or ingredients past the MAX
FILL line.
3 Place the Hybrid Edge™ Blades Assembly
on the top of the bowl and turn clockwise
to seal.
16 ninjakitchen.co.uk
4 Turn the bowl upside down and install on
motor base by aligning the tabs on the
bowl with the slots on the base. Then,
rotate bowl clockwise until it clicks. Once
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
NOTE: While processing, twist the Power
Paddle anti-clockwise continuously.
5a If using an Auto-iQ program, use the dial
select the program that best suits your
desired output, then press START/STOP.
During the blending process, ensure to
twist the Power Paddle anti-clockwise
continuously. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press START/STOP.
5b For Manual mode, press IQ/MANUAL. With
speed 10 on the display, press START/STOP.
During the blending process, twist the Power
Paddle anti-clockwise continuously. Once
the ingredients have reached your desired
consistency, press START/STOP and wait for
the unit to come to a complete stop.
NOTE: Only speed 10 is available when
using the Power Nutri™ Bowl.
6 Remove the bowl from the motor base
by turning it anti-clockwise and then
lifting up.
7 Remove the blade assembly by twisting
anti-clockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid or
Storage Lid to cover. Exercise care when
handling the blade assembly, as the
blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the bowl and twist
clockwise until firmly sealed.
9 Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance
section for cleaning and storage
instructions.
ninjakitchen.co.uk
17
Advertisement
Table of Contents
