Singcall SC-R15 Manual

Singcall SC-R15 Manual

Small receiver

Advertisement

 Call button registering
1) Standby mode, keep pressing key (FUN) 3 seconds till [F1] appears on the screen.
2) Press key (ENT), the biggest registered number ([xx.]、[xxx.])appears on screen ,if
there is no registered number, then [01] or [001] appears.
3) Press (UP),(MOVE),(DOWN) to choose the registered number wanted, the radix
point behind the chose number lights means the number has been registered and
can not registered again. Press key (ENT) to delete this number (after deleting, the
radix point is not light), then you can register the number again.
4) Press the call button to be registered, the number flashes on screen with music
prompt, adding 1 automatically and then stops.
5) Press key (ESC), and[ F1] appears.
6) Press key (ESC) again, back to standby mode. The registration is finished.
7) Repeat step3) ~4) to register all the call buttons you need, and then press key (ESC)
twice, back to standby mode. Registration finished.
 Prompt music setting
1) Standby mode, press key (FUN) 3 seconds till [F1] appears on the screen.
2) Use key (UP) to choose [F2].
3) Press key (ENT) and (01) appears.
4) Use the key (UP),(DOWN) to choose prompt music.01 means the music
"Dingdong",02 means "alarming sound" and 00 means "voice report".
5)Press key (ENT), and [F2] appears.
6)Press key (ESC) and back to standby mode. Prompt setting is done.
 Display time setting for the call button numbers
1) Standby mode, press key (FUN) 3 seconds till [F1] appears on the screen.
2) Use key(UP)to choose [F3].
3) Press key (ENT), and [20] appears on the screen.
4) Use key (UP),(DOWN) to choose the display time wanted.(00)means unlimited
display, the figure of 01-99 means the corresponding display time from 1-99 seconds.
5) Press key (ENT), and [F3] appears.
6) Press key (ESC) and back to standby mode. The setting is done.
 Prompt music length setting
1) Standby mode, press key (FUN) 3 seconds and [F1] appears on the screen.
2) Use key (UP)to choose [F4].
3) Press key (ENT), and [01] appears on the screen.
4)Use key (UP),(DOWN) to choose the prompt music length and voice report times
wanted, number 01-15 means 15 kinds of the length, one figure means the prompt
length is 2 seconds, then 15 means the prompt length is 30 seconds. 01-15 also means
the frequency of voice report is 01-15 times.
Manual for Small Receiver

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC-R15 and is the answer not in the manual?

Questions and answers

Summary of Contents for Singcall SC-R15

  • Page 1 Manual for Small Receiver  Call button registering 1) Standby mode, keep pressing key (FUN) 3 seconds till [F1] appears on the screen. 2) Press key (ENT), the biggest registered number ([xx.]、[xxx.])appears on screen ,if there is no registered number, then [01] or [001] appears. 3) Press (UP),(MOVE),(DOWN) to choose the registered number wanted, the radix point behind the chose number lights means the number has been registered and can not registered again.
  • Page 2 5) Press key (ENT), and [F4] appears. 6)Press key (ESC) and back to standby mode. The setting is done.  Number display mode setting(not suitable for receiver SC-R10) 1) Standby mode, press key (FUN) 3 seconds till [F1] appears on the screen. 2) Use key (UP) to choose [F5].

Table of Contents