Elongation; Setting Stitch Width And Length - Singer 8060 Instruction Manual

D. ELONGATION
Some patterns may be elongated from the original
length. You may elongate the pattern by pressing
the Function button (F3) directly under the
elongation icon.
a. Regular length
b. Elongated
A pattern cannot be elongated if the elongation
icon is not indicated.
When you pressed clear "C" button, machine will
return to regular length (also mirror/reverse will
return to regular stitch.)
E. SETTING STITCH WIDTH AND LENGTH
Machine will set the stitch width and length suitable
for the pattern.
1. You can make changes by pressing the
Function button (F4) directly under the width
and length mark.
2. LCD will change to show the stitch width and
length.
For narrower width, press Function button F2 (–).
For wider width, press Function button F3 (+).
For shorter length, press Function button F4 (–).
For longer length, press Function button F5 (+).
Pre-set stitch width and length will be indicated as
a highlighted number.
When you pressed clear "C" button, machine will
return to preset stitch width and length.
When you press the Return button (F1), LCD will
indicate previous mode (Stitch Information mode).
a. For straight stitch patterns (No. 1, 2, 3, 4, 6,
8), Stitch width buttons will change the needle
position.
To shift the needle to the left, press Function
button F2.
To shift the needle to the right, press Function
button F3.
NOTE:
When further width or length adjustments are not
possible, machine will emit multiple audible beeps.
If the width, length or number icons are not
indicated, the pattern cannot be changed.
Adjustments to the patterns may be made while
sewing.
46