Safety Instruction; Safety Symbols; Symbol Meaning - Go Power Series Operator's Manual

READ ALL INSTRUCTIONS!
EN
READ OPERATOR'S MANUAL
Residual risk!
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

WARNING:
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shields and a full
face shield when needed. We recommend
a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields.
4
56 VOLT LITHIUM-ION TELESCOPIC POWER POLE — PPX1000
People with electronic devices, such
The operation of any power

SAFETY INSTRUCTION

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assem-
ble and operate it.
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of
Read
injury, user must read and
operator's
Understand operator's manual
manual
before using this product.
Always wear safety goggles
Wear Eye or safety glasses with side
Protection shields and a full face shield
when operating this product.
Waste electrical products
should not be disposed of
WEEE
with household waste. Take
to an authorized recycler.
Do Not Do not use in the rain or
Expose To leave outdoors while it is
Rain raining.
Protection against ingress of
IPX5 IP Symbol
water degree 5
V Volt Voltage
mm Millimeter Length or size
cm Centimeter Length or size
kg Kilogram Weight
Direct Type or a characteristic of
Current current
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings designated by
the symbol and all instructions.
Save all warnings and instructions for future EN
reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Original instructions