Advertisement
To install additional camera module
If you have already installed one camera module, and you want to install the other one, you need
to follow the steps below:
1. After plugging in the new camera, the system would not response when you press button on
the module or open amcap.exe.
2. Go to the Start Menu and find My Computer. Right click on My Computer and check
Properties.
3. In Properties, select Hardware, and then device manager. You will find an exclamation mark
next to the OmniVision SuperCam, which means the driver is not correct for the camera
connected.
4. Click the icon Update Driver to add the correct driver, such that the PC can recognize both
cameras.
5. Follow the flow, at welcome window, select not to connect to windows updates to search for
driver, click next.
6. At search installation options, select not to search.
7. Select special destination to install driver. Click Have
Disk, point to the folder which contain the
evu20_xxxx.inf and install.
8. It will copy the files and install the driver. If it
complains the device has not passed Windows Logo
testing, just click "continue anyway"
9. Click Finish, the LED on the EVU20 will be lit and the
EVU20 is now ready to run.
10. Press the snap button on the EVU20, it will launch the
camera viewing program Amcap, which is come with the driver disk. The LED on the
EVU20 will be blinking.
Advertisement
