Electronics123 EVU20 Manual

Installation Manual for EVU20
General description
EVU20 is the USB 2.0 evaluation board for digital camera module AA5620, 2640, 9653 &10620 . It
provides a high speed USB interface to upload video data from camera module to PC. The
module is specially designed for evaluating the digital camera module using OmniVision image
sensor.
System requirement:
OS: Win2K(SP4) or WinXP(SP2)
CPU: Pentium 4 – 1.4GHz or above
Display card: AGP2.0 or above DirectX8.1
USB port: USB2.0
Driver Installation:
1. Power up your computer and launch WindowsXP (here we use XP as an example)
2. Plug in the USB cable, one end to EVU20 and the other end to PC. PC will prompt the new
hardware found and pop up the welcome dialog. Select not to connect to windows update to
search the driver. Click Next.
3. When "Found New Hardware Wizard" appears, click "Install from a list or specify location"
Then click next.
4. Select "Search for the best driver", and then type the location or browse the driver location
and click next.
5. It will copy the files and install the driver. If it complains the device has not passed Windows
Logo testing, just click "continue anyway". When complete the copying the files, the new
dialog box will be popped up.
6. Click Finish, the LED on the EVU20 will be lit and the EVU20 is now ready to run.
7. Press the snap button on the EVU20, it will launch the camera viewing program Amcap,
which is come with the driver disk. The LED on the EVU20 will be blinking.
8. If no image is displayed, click Option, then check preview.