Download Print this page

Radiant Lighting Faze flow top Manual

•

Please ensure to read instructions correctly for the installation of the ﬁtting provided. Failure to do so will result in a void of warranty and

compromises the safety of luminaire.

•

Radiant Lighting are not liable for warranties when luminaire is damaged by incorrect installation. The installation of the luminaires must be

in accordance with the national safety regulations.

Please refer to Radiant Lighting's General Terms & Conditions for more information concerning the installation and warranty of our products.

- Handle with care.

- Flow Top may not be modiﬁed or converted otherwise than prescribed.

- Flow Top can only be bent upwards & downwards. Make sure that this predetermined bending direction is never changed.

- Do not bend sharply or too tight. Maximum bending diameter is 240mm.

- Do not twist.

5W / 10W

CAUTION - light fitting must be installed by a licensed electrician.

Bending Diameter

240mm

- Do not hang.

FLOW TOP

- Do not droop.

90+

Extruded Silicone

5 Years

For all other queries, please call us on 1300 438 609

Table of Contents

Do you have a question about the Faze flow top and is the answer not in the manual?

Page 1 • Radiant Lighting are not liable for warranties when luminaire is damaged by incorrect installation. The installation of the luminaires must be in accordance with the national safety regulations. Please refer to Radiant Lighting’s General Terms & Conditions for more information concerning the installation and warranty of our products.
Page 2 1Mtr/pcs Aluminium Proﬁle Press gently with palm, do not use your ﬁngers. Side Cable Entry Connection *Seamless Connection Bottom Cable Entry Connection *Seamless Connection Front Cable Entry Connection...