Vestil PRAIL-102 Quick Start Manual

Interlocking crowd control barriers

Download this manual

Rev. 12/7/2017

PRAIL-102 Interlocking Crowd Control Barriers

Receiving instructions:

After delivery, remove the packaging from the product. Inspect the product closely to determine whether

it sustained damage during transport. If damage is discovered, immediately record a complete description

of the damage on the bill of lading. If the product is undamaged, discard the packaging.

Note:

The end-user is solely responsible for confirming that product design complies with all laws, regulations,

codes, and mandatory standards applied where the product is used.

Signal Words......................................................................................................................... 2

Safety Guidelines.................................................................................................................... 2

Barrier Frame Models.............................................................................................................. 2

Types of Feet & Foot Installation............................................................................................... 2

Specifications........................................................................................................................ 3

Using the Barrier..................................................................................................................... 3

Limited Warranty..................................................................................................................... 4

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Web:

www.vestilmfg.com

**Photo of PRAIL-102-Y

Table of Contents

PRAIL-102, MANUAL

e-mail:

info@vestil.com

Page 1 of 4

Page 1 Web: www.vestilmfg.com e-mail: info@vestil.com PRAIL-102 Interlocking Crowd Control Barriers **Photo of PRAIL-102-Y Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, immediately record a complete description of the damage on the bill of lading.
Page 2 Safety Guidelines: Vestil strives to identify all foreseeable hazards of using its products, but no manual can address every conceivable risk. Read the entire manual before assembling and using the barrier. If this product is used improperly or carelessly, people might sustain serious personal injuries or could even be killed.
Page 3 2) and pull the foot out of barrier. Hook 1. Lift this end. Receiver Foot with wheels Standard, Unfasten hardware curved and pull foot out of foot barrier Copyright 2017 Vestil Manufacturing Corp. Page 3 of 4...
Page 4 The warranty period for original dynamic components is 30 days. For wearing components, the warranty period is also 30 days. The warranty period begins on the date when Vestil ships the product to the warrantee. If the product was purchased from an authorized distributor, the period begins when the distributor ships the product. Vestil may extend the warranty period for products shipped from authorized distributors by up to 30 days to the duration necessary to account for shipping time.