Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, installation, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Signal Words......................................................................................................................... 2
Hazards of Improper Use......................................................................................................... 2
Installation............................................................................................................................ 11
Operating the Barricade..........................................................................................................12
Labeling Diagram .............................................................................................................. ........13
Limited warranty.................................................................................................................... 14
Copyright 2017 Vestil Manufacturing Corp.
rev. 5/5/2017
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Instruction Manual
DJG-100 and DJG-100-10
Table of Contents
DJG-100, MANUAL
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
info@vestil.com
Page 1 of 14