Advertisement
Function Instructions
W2 Heating Version
Device will keep dispensing water after power on.
"Normal" will be default mode, double click "Function key "
to switch mode;
Normal-dispense water continuously
Smart-dispense water intermittently
Long press the Function key for 3 Seconds to turn on the
heating function. When the water temperature is detected to
be lower than 26℃, the device will heat automatically until
reaches up for 30℃. After heating, the device will switch to
insulation state.
Indicator Status:
Working: white light will be solid for both"Normal"&"Smart"
working mode
Low water alarm: White indicator for Normal & Smart will
flash in the meanwhile.
Heating: Blue light flash.
Insulation: Blue light will be solid.
Advertisement
