Wiring Guide for 1x CBT 1000
Connect 1 amplifier channel to each CBT 1000 speaker
Recommended Amplifiers
Crown XTi6002 – 2100W @ 4 ohms
(One channel for each CBT 1000)
(NL4 or Binding
OR
Post Outputs)
Crown CDi6000 – 2100W @ 4 ohms
(One channel for each CBT 1000)
(Barrier Strip
OR
Outputs)
Crown DCi2x2400N – 2400W @ 4 ohms
(One channel for each CBT 1000)
(Barrier Strip
Outputs)
Amplifier Selection Considerations
•
How much power is needed
(less powerful amplifiers can be used if you don't
need all the SPL the speaker is capable of producing. However, pushing a lower-
power amplifier into clipping can damage the speaker).
•
How much DSP and which DSP functions are required.
•
Whether the amp needs to be networked (DCi-N).
•
Project's budget.
HARMAN CBT 1000 and 1000E Quick Guide
speaker
+
-
(Barrier Strip
Input)
CBT 1000
Wiring Guide for 1x CBT 1000 speaker + 1x CBT 1000E Array
Connect 1 amplifier channel to each CBT 1000 + CBT 1000E array
Recommended Amplifier
Crown DCi2x2400N – 2400W @ 4 ohms
(One channel for each CBT 1000)
Note:
•
Important
– The CBT 1000E must be connected in
parallel with the CBT 1000 and the two of them MUST
be in proper polarity. "+" to "+" and "–" to "–".
•
Other system configurations are available. Please reach
out to your Harman sales rep for details. And exception
request may be required, depending on equipment
utilized.
+
-
(Barrier Strip
(Barrier Strip
Outputs)
Input)
CBT 1000
+
-
+
-
(Barrier Strip
Input)
CBT 1000E