Advertisement
Quick Links
Sensors
Introducing a cost-effective solution for full color sensing applications — SA1J
full color recognition sensor. Outstanding benets of the SA1J include an extremely
high response speed (0.3ms), high resolution, and a very low cost.
Key features of the SA1J color sensor include:
• Choice of a 3-color version or a 1-color version
• Fast response (0.3ms) — perfect for sensing complex color marks
at high speed
• Three LEDs (Red, Green, and Blue) provide a long sensing life
• Easy alignment and targeting using a visible spot
• Set sensor with the touch of a button
• Highly sensitive to variations in color; can distinguish between
subtle shades of the same color
• Up to 60mm sensing distance
• IP67 rated
Power Voltage
Current Draw
Dielectric Strength
Insulation Resistance
Operating Temperature
Operating Humidity
Storage Temperature
Vibration Resistance
Shock Resistance
Extraneous Light Immunity
Material
Degree of Protection
Cable
Weight
Dimensions (HxWxD)
Accessories
TREICHL-ATM Electronic Auf der Bült 10 - 12
Tel. 02166 958545
SA1J: Full Color Recognition Sensors
1-Color Version
12 to 24V DC (ripple 10% maximum)
Operating voltage: 10 to 30V DC
150mA maximum
Between live and dead parts: 1,000V AC, 1 minute
Between live and dead parts: 20M Ω minimum (500V DC megger)
–10 to +50˚ C
(performance will be adversely affected if the sensor becomes coated with ice)
35 to 85% RH (avoid condensation)
–30 to +70˚ C
Damage limits: 10 to 55Hz
Single amplitude: 0.75mm
2 hours in each of 3 axes
2
Damage limits: 500m/s
(approximately 50G)
5 shocks in each of 3 axes
Sunlight: 10,000 lux maximum
Halogen lamp: 3,000 lux maximum
Housing: Aluminum
Lens: Glass
Cover: Polyarylate
IP67 — IEC Pub 529
Cable type: ø5.4mm 5-core oiltight vinyl
2
cabtyre cable (0.2mm
) 2m long
Approximately 250g
1.97" x 1.18" x 3.15" (50 x 30 x 80mm)
Adjusting screwdriver
Fax 02166 958547
3-Color Version
Cable type: ø5.4mm 7-core oiltight vinyl
2
cabtyre cable (0.2mm
) 2m long
D 41189 Mönchengladbach
eMail: atm@treichl.de internet: www.lichtschranke.de
SA1J : Full Color Recognition
Advertisement
Related Manuals for IDEC SA1J-C1NQ
Summary of Contents for IDEC SA1J-C1NQ
- Page 1 Sensors SA1J : Full Color Recognition SA1J: Full Color Recognition Sensors Introducing a cost-effective solution for full color sensing applications — SA1J full color recognition sensor. Outstanding benets of the SA1J include an extremely high response speed (0.3ms), high resolution, and a very low cost. Key features of the SA1J color sensor include: •...
- Page 2 Sensors SA1J : Full Color Recognition Part Numbers: SA1J Sensors 1-Color Version 3-Color Version Output Spot Diameter Sensing Distance Inspection Spot SA1J-C1N1 SA1J-C1N3 ø 0.157" (ø 4mm) 1.575" (40mm) ø 0.236" (ø 6mm) 1.969" (50mm) Standard SA1J-C1P1 SA1J-C1P3 ø 0.315" (ø 8mm) 2.362"...
- Page 3 Choose between a small spot (2.5mm) or a standard spot (8mm) with a long distance range Detecting presence or absence of a logo on a cap or lid Detecting objects that are the incorrect shape or color IDEC IDEC Normal Normal Normal...
- Page 4 Sensors SA1J : Full Color Recognition Operation (1-Color Version) Control Panel Response mode switch: Fast response mode (F): This mode is used for high-speed inspection. Response time is 0.3ms. Operation LED: The Operation LED (Yellow) is on when the control output is Normal response mode (N): This mode is used for normal inspection.
- Page 5 Sensors SA1J : Full Color Recognition Operation (3-Color Version) Control Panel 1. In the previous gur e, “t” represents the amount of time the external synchronous signals should remain on in response to the response mode. Operation LEDs: The operation LEDs (yellow) are on when the control out- F (fast response): 0.5ms or more put is on.
- Page 6 Sensors SA1J : Full Color Recognition Reference Color Registration 1-Color Version 3-Color Version Manual Reference Color Registration Manual Reference Color Registration Follow the instructions below to register the reference color Follow the instructions below to register the reference color using the Reference Color Set Button: using the Reference Color Set Button: 1.
-
Page 7: Installation
Sensors SA1J : Full Color Recognition Installation Standard Installation Installation Notes Do not use the sensor in extremely dusty areas or areas sub- ject to strong shocks or vibrations. In addition, do not use the sensor near the following: • Induction machines and heat sources •... - Page 8 Sensors SA1J : Full Color Recognition Wiring, continued Connection Diagram (1-color version) Connection Diagram (3-color version) Lead Wire Lead Wire Brown Brown Blue Blue Pink Violet Pink Black Violet White Gray Black Wiring (1-color version) Wiring (3-color version) Lead Wire Color Name Function Lead Wire Color...