Advertisement
Sensors
TREICHL-ATM Electronic Auf der Bült 10 - 12
Tel. 02166 958545
Part Numbers: SA1J Sensors
1-Color Version
3-Color Version
SA1J-C1N1
SA1J-C1N3
SA1J-C1P1
SA1J-C1P3
SA1J-C2N1
SA1J-C2N3
SA1J-C2P1
SA1J-C2P3
Reference Color Registration
Tolerance
Inspection Mode
Operation Mode
Synchronous Mode
Response Mode
Control Output
Operation LED
Off-Delay Timer
Timer
SET Input
External Synchronous Input
Light Source
1. Each channel has its own independent short circuit protection.
2. * The target color is dened by the oper ation mode setting.
Fax 02166 958547
Output
Spot Diameter
NPN
ø 0.157" (ø 4mm)
ø 0.236" (ø 6mm)
PNP
ø 0.315" (ø 8mm)
NPN
ø 0.098" (ø 2.5mm)
ø 0.118" (ø 3mm)
PNP
ø 0.177" (ø 4.5mm)
1-Color Version
Push SET button (sensor aimed at color
target); sensor records reference color
in EEPROM memory
Digital setting for 5 degrees of
inspection sensitivity
Selectable: Color component only (C) or color component plus intensity (C+I)
(depth of color)
—
Selectable: Internal response mode or synchronized with an external signal
High-speed (F): 0.3ms
Normal speed (N): 1ms
Slow speed (S): 5ms
On: Detected color matches target color
NPN or PNP transistor open collector
30V DC, 100mA maximum
Residual: 1.5V maximum, short circuit
protection
On: When control output is on (yellow LED)
Selectable: Timer ON (T-ON) or Timer OFF (T-OFF)
OFF delay timer 40ms
NPN:
30V DC maximum/3.6mA
(when connected to 0V)
Typical operating voltage:
(0V) +4V maximum
PNP:
30V DC maximum/3mA
(when connected to 24V)
Typical operating voltage:
(+V) –4V maximum
3 LEDs (Red, Green, Blue)
D 41189 Mönchengladbach
eMail: atm@treichl.de internet: www.lichtschranke.de
SA1J : Full Color Recognition
Sensing Distance
Inspection Spot
1.575" (40mm)
1.969" (50mm)
Standard
2.362" (60mm)
0.591" (15mm)
0.787" (20mm)
Small
0.984" (25mm)
3-Color Version
Set dial to A: Push SET button (sensor
aimed at color target A); sensor records
reference color A in EEPROM memory
Set dial to B: Push SET button (sensor
aimed at color target B); sensor records
reference color B in EEPROM memory
Set dial to C: Push SET button (sensor
aimed at color target C); sensor records
reference color C in EEPROM memory
Digital setting for 5 degrees of inspection
sensitivity (normal run mode only)
Selectable:
S run: Auto select, sensor determines
tolerance (no need to set tolerance)
Normal run mode: Manually select
tolerance (1–5) for each reference color
High-speed (F): 0.8ms
Normal speed (N): 1.5ms
Slow speed (S): 6ms
Control output A on: Detected color cor-
responds to target color A*
Control output B on: Detected color cor-
responds to target color B*
Control output C on: Detected color cor-
responds to target color C*
NPN or PNP transistor open collector
30V DC, 100mA maximum
Residual: 1.5V maximum, short circuit
protection
NPN:
30V DC maximum/3.6mA
(when connected to 0V)
Typical operating voltage:
(0V) +4V maximum
PNP:
30V DC maximum/3mA
(when connected to 24V)
Typical operating voltage:
(+V) –4V maximum
Advertisement
