Table of Contents
Advertisement
Available languages
Available languages
STRUCTURE
Transparent container with safety lid
Momentary switch for extra safety
Stainless steel blade
HOW TO USE
The appliance is designed to work on standard voltage only. Please check that the main
supply corresponds to what show on the rating plate of the appliance.
1.
Before first use bowl, plate and blade should be washed in warm soapy water.
2.
Place the blade onto the blade supporting pin.
3.
Fill the ingredients inside the bowl.
4.
Place plate on the bowl.
5.
Place the power unit on the plate-bowl assembly and twist it slightly until the blade
fits into the power unit.
6.
Plug the cord into 220-240V AC outlet.
7.
Hold the bowl with one hand and press down on the power unit with the other
hand and the appliance starts up immediately.
8.
The appliance is intended for an operation cycle maximum of 20 seconds on and
minimum 2 minutes off, and note exceed 3 cycles. A longer break of about 30
minutes is necessary in order to allow the appliance cool down.
9.
Unplug the appliance, and wait for the blade to stop completely.
10. Remove the power unit, the plate and the blade.
EN - 1
Advertisement
Table of Contents
