Setting The Date; Setting The Time - Haemmer EMINENT User Manual

SETTING THE DATE

1. Pull the crown counter-clockwise out to the 1. CLICK-POSITION.
2. Turn the crown counter-clockwise to set the date.
!! If the date is set between the hours of around 9:00 PM and
1:00 AM, the date may not change on the following day.

SETTING THE TIME

1. Pull the crown counter-clockwise out to the 2. CLICK-POSITION.
2. Turn the crown clockwise to set hour and minute hands.
After setting push the crown to the NORMAL-POSITION
and turning clockwise. !! IMPORTANT, WATERPROOF !!
CHRONOGRAPH RESET
e.g. After replacing battery.
This procedure shoud be performed when the chronograph second
hand and minute hand does not return to the Zero position.
1. Pull the crown counter-clockwise out to the 2. CLICK-POSITION.
2. Press BUTTON „A" to set the chronograph second hand to
the zero position. The chronograph hand can be advanced
rapidly by continuously pressing BUTTON „A".
3. Press BUTTON „B" to set the chronograph minute hand to
the zero position.
After setting push the crown to the NORMAL-POSITION
and turning clockwise. !! IMPORTANT, WATERPROOF !!