Midland XT-30 Instruction Manual page 37

Insert the batteries into the radio. Plug the USB supplied in the package into
the USB port of the radio. The icon with its bars will be displayed to indicate
that the radio is being charged. Once the batteries are fully charged the bars of
the icon will be steady. We recommend to disconnect the power supply
(disconnect the USB cable).
Note: the USB cable must be connected to devices with a charge current of
500mAh at least.
Auto power save
XT30 is supplied with an automatic current economy circuit. If the transceiver
receives no signal for more than 10 seconds, the "power save function" auto-
matically activates. The battery life may increase by up to 50 %.
Accessories
XT30 is provided with a MIC/SPK jack for the connection of external acces-
sories such as mikes or headsets. This plug is 2-pin type and is compatible with
all Midland accessories.
XT-30 instruction guide | 11