Midland XT-30 Instruction Manual page 32

1. VOX function activated
2. Appears when the keypad lock is activated
3. Battery level
4. It is displayed when the radio is receiving a signal
5. Appears when the radio is transmitting (PTT pressed)
Indicates the selected CTCSS tone
6.
7. Indicates the selected channel
8. Antenna
LCD Display
9.
10. SPK/MIC jack. Jack for the connection to external accessories such as
microphones, headsets, etc
MON/SCAN. With this button you can enable/disable the Scan and
11.
Monitor functions
12. MENU/ : Press this control to turn on/off the unit and to enter the ra-
dio's menu.
13. ▲/▼: use these buttons to adjust the volume, select the channels and
functions
14. Microphone
15. Speaker
16. /CALL. Press this button to lock the keypad and to send out a call signal.
17. PTT button
18. USB port for the recharge of the radio
19. Battery and battery compartment. The transceiver accepts 3 x AAA
alkaline/ rechargeable batteries (supplied in the package). To open the
battery compartment, hold the unit face down and slide the cover.
Attention: The supplied batteries must be recharged before the first use (see the
section "Recharge" for more info).
6 | XT-30 instruction guide