Manual Override - Home Decorators Collection HB7251MA-292 Use And Care Manual

Operation (continued)

MANUAL OVERRIDE


You may manually turn on the light from
inside your home using the wall switch that
controls your light fixture.

This feature may be used during nighttime
when the light is off, while the circuit is in
the Motion Sensing Mode.

To manually turn on the light and activate
the Manual Override, quickly flip your wall
switch OFF-ON-OFF-ON within a 3 second
span.

The light will remain on until the override is
deactivated.

To turn off the light and deactivate the
Manual Override, flip your wall switch OFF-
ON-OFF-ON again. This will return the
circuit back to the Motion Sensing Mode. If
you do not deactivate the Manual Override,
the light will remain on for 8 hours or until
dawn (which ever comes first), and then
the light will turn off automatically.

To turn off the light, and you may toggle
the switch in this manner as many times as
you need, to alternate between the two
modes, Manual Override Mode (light on)
and Motion Sensing Mode (light off).
NOTE: Sensitivity directly correlates to
the sensor's detection range.
NOTE: This switch toggling sequence alternates
the circuit between Manual Override (light on)
Mode and Motion Sensing Mode (light off)
Motion Sensing
Mode (light off)
HOMEDEPOT.COM/HOMEDECORATORS
9
Please contact 1-800-986-3460 for further assistance.
Switch in the "ON"
position
Flip wall switch OFF-ON-
OFF-ON
within 3 seconds
Manual Override
Mode (light on)