Panasonic AVCCAM AG-AC160P Operating Instructions Manual page 32

Start
recording
Slot 1
Clip A
Clip A
Slot 2
Memory card recording time
End recording
Start recording
Standby
Clip B
Standby
Clip B
To resume the SIMUL REC, replace the memory card in Slot 1
to a new memory card and press the <START/STOP> button.
If you press the <START/STOP> button without replacing the
memory card, video will be recorded normally on the memory
card in Slot 2 (with remaining memory).
Stop recording (memory full)
When the memory card with
lower remaining memory
becomes full, SIMUL REC will
stop. (This figure shows the
case that the memory card in
Slot 1 becomes full.)
Clip C