GE APCD07 User Manual page 8

Care and Cleaning
Internal Water Tank
The Water Full indicator ("FL" on the control panel
filled with condensed water. The unit will not cool until
the tank has been emptied to prevent overflow and
possible damage to the floor under the AC.
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
2. Place a shallow 1 1/2 quart or larger pan (not
3. Remove the cap and the rubber plug and drain the
water tank.
4. Re-insert the drain plug and screw the cap snugly
into place.
5. Plug in or reconnect power.
Continuous Draining
(optional and only in dry mode)
1. Remove the top drain cap.
2. Connect a hose with a garden hose connection to
the outlet.
3. Route the drain hose to a suitably sized container*
or a floor drain.
* Be sure to use a large container (3 gallons or larger
container continuously. The unit will not shut off when
the container is full. An overflowing container can
cause flooding and damage to the floor."
Storage
If the unit is not being used for a long period of time:
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
How to Insert the Batteries in the Remote Control
1. Remove the battery cover by sliding it according to the
arrow direction.
of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
8
Rubber Plug
3. Use the original packaging to repack the unit to avoid
a buildup of dust or dirt.
4. Store the air conditioner in a cool, Dry location.
NOTES:
rechargeable batteries.
system is not going to be used for a long time.
49-5000544 Rev. 1