Brother HL-2600CN Series Quick Setup Manual page 2

Network Quick Setup Guide
If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to
installation.
If you are an Administrator: Configure your network printer setting referring to the following instructions.
The default password for the print server is 'access'. You can use the BRAdmin Professional Software or a web browser to change
this password.
Setting Your Language on the Control Panel
To change the language settings of the printer do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
- - MENU - - SETUP
SETUP LANGUAGE
READY
K C M Y
NETWORK READY NETWORK READY
HL-2600CN
Power Ready Data
Alarm
Job
Go Go
Cancel
Back Set Back
Secure
Print
1 Press the + button until 2 Press the Set button
Reprint Back Set
SETUP is displayed. again.
Press the Set button.
Setting Your Printer IP Address and Subnet Mask
To set the printer IP address using the printer control panel do the following.
(All references are to what you will see in the lower portion of the LCD panel.)
- - MENU - - NETWORK
NETWORK TCP / I P
READY
K C M Y
NETWORK READY NETWORK READY
HL-2600CN
Power Ready Data
Alarm
Job
Go Go
Cancel
Back Set Back
Secure
Print
Press the + button until Press the Set button
1 2
Reprint Back Set
NETWORK is displayed. again.
Press the Set button.
TCP / I P
SUBNET MASK=
Back Set
Press the + button until
5
SUBNET MASK= is displayed.
Press the Set button.
For more information refer to the Network User's Guide on the supplied CD-ROM or go to http://solutions.brother.com
©2001 Brother Industries, Ltd. ©1998-2001 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark of UNIX
Systems Laboratories. PostScript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple Macintosh, iMac, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc. BRAdmin
Professional is a trademark of Brother Industries, Ltd.
All other brand and product names mentioned in this Network Quick Setup Guide and User's Guide are registered trademarks or trademarks of respective companies.
LANGUAGE
=ENGL I SH *
Set Back Set
3 Scroll through the available languages by
pressing the + or - buttons. Press the Set
button to accept the appropriate language.
An asterisk mark (*) appears on the LCD.
(Using the Control Panel)
TCP / I P
I P ADDRESS=
Set Back Set
Press the + button until IP Enter the IP address of the printer using
3 4
ADDRESS = is displayed. the + and - buttons. Press the Set button
Press the Set button. to go to next digit. Press the Set button
to complete the IP address.
An asterisk mark (*) appears on the LCD.
SUBNET MASK= READY
0 . 0 . 0 . 0 *
Back Set
Enter the subnet mask settings in the same 7 Press the Go button to put the printer
6
way that you entered the IP address. back into its READY state.
An asterisk mark (*) appears on the LCD.
For the Administrator
Install the BRAdmin Professional Configuration utility
The BRAdmin Professional software is designed to manage your Brother network connected devices. For example, Brother network
ready printers and Brother network ready Multifunction devices can be managed using the BRAdmin Professional software. The
BRAdmin Professional software can also be used to manage devices from other manufacturers whose products support the SNMP
(Simple Network Management Protocol).
For more information on the BRAdmin Professional utility go to http://solutions.brother.com
READY
Insert the CD-ROM into your CD-ROM drive.
1
The opening screen will appear automatically.
Follow the instructions on the screen.
Ready
Network User's Guide Chapter Map
Go
To configure the print server refer to the Network User's Guide.
4 Press the Go button to put
the printer back into its
READY state.
Windows ® 95/98/Me
Windows NT ®
I P ADDRESS=
1 9 2 . 0 . 0 . 1 9 2 *
Windows ® 2000/XP
Back Set
UNIX/Linux
Macintosh ®
OS2 Warp Server
LAN Server
Ready
Print Configuration Page
Go
To print a configuration page, use a fine ball point pen to hold down the
Network Test Button for less than 5 seconds.
Factory Default Setting
If you wish to reset the print server back to its default factory settings
(resetting all information such as the password and IP address information),
use a fine ball point pen to hold down the Network Test Button for more than 5
seconds.
(For Windows ® Users Only)
Click the Install Software icon
2
on the Menu screen.
® ®
Windows Macintosh
Peer-to-Peer TCP/IP Chapter 3
NetBIOS Chapter 4
Brother Internet Print TCP/IP Chapter 5
Netware IPX/SPX Chapter 6
Peer-to-Peer TCP/IP Chapter 2
NetBIOS Chapter 4
DLC/LLC Chapter 8
Brother Internet Print (NT ® 4.0 only) TCP/IP Chapter 5
Netware IPX/SPX Chapter 6
Peer-to-Peer TCP/IP Chapter 2
NetBIOS Chapter 4
(Windows ® 2000 only) DLC/LLC Chapter 8
IPP (Internet Printing Protocol) TCP/IP Chapter 2
Brother Internet Print TCP/IP Chapter 5
Netware IPX/SPX Chapter 6
TCP/IP Chapter 1
AppleTalk Chapter 7
TCP/IP Chapter 7
TCP/IP Chapter 2
NetBIOS Chapter 4
Click "BRAdmin Professional."
3
Follow the instructions on the screen.
Peer-to-Peer Printing
NetBIOS Peer-to-Peer Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
How to Configure Internet Printing
Novell Netware Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
DLC Printing
TCP/IP Printing
How to Configure Internet Printing
Novell Netware Printing
UNIX Printing
Macintosh Printing
Macintosh Printing
TCP/IP Printing
NetBIOS Peer-to-Peer Printing
Test Button