Before Use - Frigidaire FCL-MW10W Manuallines For Use

befORe Use

1 Remove all packaging, including the tape covering the
rotating axis. Keep all packaging until you are sure that
the product is operating correctly.
2 Thoroughly inspect the microwave to check for visible
damage during transit. If there is any visible damage
do not use the microwave.
3 Check that the voltage printed on the rating plate on
the back of the microwave oven corresponds to the
mains voltage in your home.
4 Place the microwave oven on a secure flat surface,
away from the surface edge and away from contact
with water, steam or high temperatures. Ensure the
surface is strong enough to easily take the weight of
the microwave.
5 The microwave oven is intended to be used
freestanding. It is not intended to be built-in or used in
a cabinet.
6 For sufficient ventilation, please ensure that there is
a distance of at least 10cm between the back of the
microwave and the wall behind, 15cm at both sides
and 30cms between the top of the microwave and the
nearest surface.
7 Do not place any items on top of the microwave.
8 Make sure the appliance is placed so that a plug socket
is easily accessible.
9 Before plugging in, make sure the power supply cable
is undamaged.
10 Slot the rotating ring into the recess at the centre
of the rotating axis and place the glass turntable
on top. It should easily slot into place. Always have
the rotating ring and glass turntable in place when
operating the oven.
warning if the door or door seals are damaged,
the oven must not be operated until it has been
repaired by an authorised engineer.
3