Table of Contents
Advertisement
10
Then click OK.
11
Click the Finish button. You must now restart your computer before you can continue.
Associating to the printer
1
You must now create a printer on your Windows
systems using the standard Windows
Setting and then Printers.
®
Windows
95/98/Me
2
Select Add Printer to begin the printer installation.
3
Click Next when you get the Add Printer Wizard window.
4
Select Local Printer when you are asked how the printer is connected to your computer, and then click
Next.
5
Select the correct driver. Click Next when you are done.
6
If you have selected a printer driver that is already being used, you have the option of either keeping the
existing driver (recommended) or replacing it. Select the desired option and click Next.
7
Select the Brother NetBIOS Port (the port name you assigned in step 7 of the "Installing the Brother
NetBIOS Port Monitor" section and click Next.
8
Enter any desired name for the Brother printer and click Next. For example, you could call the printer
"Networked Brother Printer".
9
®
Windows
will now ask you if you wish to print out a test page, select Yes and then select Finish.
You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed
through your computer.
®
Windows NT
4.0 / Windows
2
Select Add Printer to begin the printer installation.
3
Click Next when you get the Add Printer Wizard window.
4
Select Local printer (Windows
when you are asked how the printer is connected to your computer, and then click Next.
5
Select the Brother NetBIOS Port (the port name you assigned in step 7 of the "Installing the Brother
NetBIOS Port Monitor" section and click Next.
Network printing from Windows
®
95/98/Me, Windows NT
®
printer setup procedure. To do this, go the Start button, select
®
2000/XP
®
2000) or Local printer attached to this computer (Windows
®
: NetBIOS Peer-to-Peer printing
®
®
4.0 and Windows
2000/XP
®
XP)
4
4 - 5
Advertisement
Table of Contents
Troubleshooting
