Brother HL-1240 Quick Setup Manual page 16

®
For Windows users only
Problem
The printer cannot print.
"There was an error
writing to LPT1: (or
BRUSB) for the printer."
error message displays on
your PC.
The USB driver is
installed, but it is unable
to find the BRUSB:port
For Macintosh users only
Problem
HL-1240 (or HL-1250 or
HL-1270N) does not
appear in Chooser.
Recommendation
Check that the printer is turned on.
Check that the front cover is fully closed.
Check that there is paper in the paper cassette or manual
feed slot.
Check that the power plug is connected correctly.
Check that the printer cable is connected securely.
Check that the printer cable is not damaged or broken.
- Exchange it with another one.
Check if you have selected another printer through and
interface switching device.
1 Double-click the file "DeinsUSB.exe" in the USB
directory of the CD-ROM.
2 Turn the printer off then on again.
3 The "Add New Hardware Wizard" will be launched again.
Follow the instructions in the Wizard to re-install the
driver.
Recommendation
Check that the printer is turned on.
Check that the USB interface cable or Network cable is
connected correctly.
Check that the printer driver is installed correctly.