Brother HL-1040 User Manual page 63

Question
Sometimes I get the memory
Full message. How can I
correct this?
Sometimes I get a Print
Overrun error when printing
certain documents from
Windows.
Recommendation


Reduce the print resolution or reduce the
complexity of your document and try again.


(For HL-1050)
Expand the printer memory by adding a
commercially available SIMM.


(For HL-1050)
Change the following settings in the supplied
Windows driver and try again. The best
combination of the following settings may vary
depending on your document.
Graphics Mode
TrueType Mode
Use Printer TrueType Fonts


If you are using the supplied Windows driver, turn
error recovery on in the Setup dialog box and try
again.


Reduce the print resolution or reduce the
complexity of your document and try again.


(For HL-1050)
Expand the printer memory by installing a
commercially available SIMM and set the Page
Protection ON in the supplied Windows driver.


(For HL-1050)
Change the following settings in the supplied
Windows driver and try again. The best
combination of the following settings may vary
depending on your document.
Graphics Mode
TrueType Mode
Use Printer TrueType Fonts
CHAPTER 6 TROUBLESHOOTING
6-9