Download Print this page

G.S.M Activate SWV2G-RS2 Manual page 3

Gsm 2g/3g 240v roller shutter opener

Advertisement

1. Slide back the sim door and lift it up.
2. Slide the simcard into the door making sure that the clipped corner of the simcard lines
up with the clipped corner of the simcard holder.
3. Close the simcard door.
4. Slide the simcard door to lock the simcard in place.
When you first switch the unit on, the
The
blue
LED will continue to flash until the unit is ready then the
PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE
SIMCARD AND YOU PLACE THE SIMCARD WITH THE CLIPPED CORNER FACING
1: First you must register and put credit on your simcard. Please follow the instructions
given with your simcard
2: Insert the simcard into a mobile phone and disable the voicemail using the codes
below
Vodaphone:
T-Mobile:
Orange:
EE - send the text message command VM OFF to 150
3: Refer to steps 1 - 4 in Fig 1 above
Important Notice
You must remove the PIN request from the SIM before inserting it into the unit otherwise
the device will not work. In order to do so, insert the SIM in a phone and disable the PIN
request.
INSTRUCTIONS
blue
LED will flash
IMPORTANT- PLEASE READ
OUT WARDS.
PLEASE SEE PICTURE ABOVE.
call 1210
call 222
call 4502
Page 3
green
Tesco
call
2915
O2 call
1760
Giff Gaff
call 1626
LED will come on.

Advertisement

loading