Advertisement
INSTALLATION OF BLADE
[g]
BLACK: RYOBI Grinders
[f]
SILVER: Other Grinders
[h] Washer
MAKITA Grinders /
BOSCH GWS7-100
ONLY.
Tighten
Knob Bolt
Close
CUTTING (SELF VACUUM)
Insert deeply
[b] Dust Bag
Cutting
direction
Rotating direction
CUTTING (WITH VACUUM)
Cut depth scale
Vacuum
Base Line
Hose
Cutting
direction
Base
Rotating direction
Knob Bolt
Wheel Nut direction.
[a]
Blade
Knob Bolt
O K
Connect [b] Dust Bag into the duct, then turn on the Grinder and start cutting.
Dust Bag should be emptied with every 2m of cutting.
[CAUTION]
1. Confirm the direction of cutting and Blade rotation.
2. Confirm that the fastener of the Dust Bag is securely closed.
Duct
3. Do NOT wash the Dust Bag.
4. Self Vacuum can NOT work in following cases.
Connect the Vacuum Hose into the duct,
then turn on the Vacuum and Grinder, then start cutting.
Cut depth can be adjusted by following process.
(1) Loosen the Knob Bolt.
(2) Move the Base to match the Base Line on requiring cutting depth.
(3) Tighten the Knob Bolt.
[CAUTION]
Confirm the direction of cutting and Blade rotation.
Cut depth
1. Loosen Knob Bolt and open [a] Main Unit.
2. (MAKITA Grinders and BOSCH GWS7-100 ONLY)
Set [h] Washer into the Spindle.
3. Set proper Flange [f] or [g] into the Spindle.
4. Set the Blade on the Flange.
5. Set the Wheel Nut on the Blade.
(Be care of the direction of Wheel Nut)
6. Fix the spindle and tighten the Wheel Nut.
7. Close [a] Main unit and tighten the Knob Bolt.
WARNING
Confirm the Blade does not rub on the inside of
[a] Main unit.
Confirm NO opening at
the back side.
N G
Gap
N G
N G
N G
Opening
Advertisement
