Advertisement
OPERATION
1. Connect Cleaning Gun to an
appropriate air supply.
2. For optimal performance,
set air pressure to 80 psi.
3. Open Liquid Valve to upright position.
Fine adjustments can be made while
in operation to minimize fluid use.
4. Hold Cleaning Nozzle over area to
be cleaned and depress trigger
(FIG. 2). Using a slow overlapping
motion, spray the area to be cleaned.
5. When Cleaning is completed, turn
off the Liquid Valve and follow the
application of cleaning solution with
an application of air to speed drying.
MAINTENANCE
• Shut off Liquid Valve and disconnect from air hose after each use.
• Remove Supply Cup and install storage lid after each use.
• Periodically remove the Black Cleaning Cone and soak in soapy water.
This will ensure that unit is clean and free of any dirt and debris.
• To prevent clogging, ensure cleaning solution is free of dirt and debris.
• Draw and rinse all remaining solution from Cleaning Gun after each use to avoid clogging.
To order parts and supplies: 800.345.1178 >> eastwood.com
FIG. 2
5
Advertisement
