Advertisement
SET-UP
1. Thread the included Air Fitting into the air inlet of the tool using TFE thread sealing tape
(not included).
2. Fill Supply Cup with a water soluble cleaning solution of choice.
3. Install Supply Cup onto Gun.
Do not exceed 90 PSI.
Avoid spraying in face or directly to flesh.
Do not direct spray at other persons or pets.
FIG. 1
Black Cleaning Cone
""""
4
PERSONAL SAFETY HAZARD!
Supply Cup
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Liquid Valve
Advertisement
