Hoover MAXLIFE PRO PET SWIVEL User Manual page 11

Maintenance
Cleaning the Filters
Pre-Motor Filter
To reduce the risk of personal injury, unplug before cleaning or servicing.
Remove the dirt cup
to locate the filter.
1
WARNING
2
5
Use the PULL tab to
remove the filter.
3
Gently squeeze filter
to remove excess
moisture.
24H
6
Separate the foam
filter from the filter
frame.
4
Let foam filter
and frame air dry
TIP:
separately for at
Replace filters when heavily discolored.
least 24 hours prior
Set filter frame on its side when drying to
to reassembling and
allow excess moisture to drain off.
reinstalling back
into the vacuum to
ensure the filters
dry completely.
Rinse foam filter
and filter frame
under running
water until all
debris is clear.
11