Advertisement
Powering the Speedway
The Speedway reader can be powered in one of two ways: through the Speedway's Power
over Ethernet (PoE / PoE+) capability, or with an AC power source.
NOTE:
Use either AC Power or PoE / PoE+. Do not use both simultaneously.
With PoE / PoE+
1.
Use the appropriate PoE/PoE+ Power Sourcing Equipment (PSE) and route an
Ethernet cable from the PSE to the Speedway's Ethernet port.
•
R660-EU2 models: IEEE 802.3at certified (PoE+)
•
All other models: IEEE 802.3af certified (PoE)
With AC Power
Connect an Impinj universal power supply to the +24VDC power supply port
using a region-specific AC power cord.
Secure the cable using the locking connector
Route an Ethernet cable from the work area outlet to the 10/100BASE-T port on
the reader
NOTE:
This product is intended to be supplied with a Listed/Certified power
supply, marked LPS or Class 2, with 24Vdc output, rated minimum 2.1A.
(Ce produit est conçu pour être alimenté avec une alimentation Mis /
certifiés, marqué LPS ou de classe 2, avec sortie 24V, 2,1 A nominal
minimum)
Speedway Connectivity with DHCP Services
Make sure your Speedway is connected to your local network via Ethernet.
Determine the Speedway hostname to connect to a network with a DHCP server.
•
Hostname: Speedwayr-XX-XX-XX (where XX-XX-XX is the last 3 hex
couplets of the reader MAC address, e.g. Speedwayr-12-AB-CD)
If desired, test your connection by pinging <hostname>.local in your PC's
command prompt (e.g., ping speedwayr-12-AB-CD.local).
NOTE:
If you are connecting your Speedway to a network with static IP
addressing, refer to Speedway Installation and Operations Guide on the
Support Portal for instructions.
Updating the Firmware
Connect to the web configuration page using a web browser at the URL
http://<Hostname or Static IP>.
Log in using default credentials:
•
username: root
•
password: impinj
Select your region from the drop-down list. (Optional)
NOTE:
The user is responsible for ensuring operation with the correct RF settings
and is solely responsible for any fines and other damages due to incorrect
or non-compliant country/region settings
Document Version 3.0
Using Impinj ItemTest Software
© 2021, Impinj, Inc.
Document Version 3.0
NOTE:
GX1 and GX2 Speedway readers have no region pre-configured and will
not transmit RAIN RFID signals until a region is selected.
The Speedway runs Impinj Octane firmware. Make a note of the "Software
Version" shown on the web configuration page. If you are not running the latest
version, upgrade using the "Reader Upgrade" utility. (Download from the Support
Portal or ask your Impinj authorized partner for the latest released version.)
Under "Reader Reboot", click the REBOOT button. When changing operating
region, the change does not take effect until the next reboot.
1.
Open the Impinj ItemTest software application.
2.
Add a new data source by clicking:
a.
Enter reader hostname (Speedwayr-XX-XX-XX) or static IP address
b.
Click Add Data Source
c.
Ensure the reader data source is enabled:
3.
Select the Inventory showcase (default). Place tags in the antenna field of view.
4.
Start tag inventory operation by clicking:
a.
Click a column header to sort by a specific attribute
b.
Right-click any column header to select which attributes are displayed
5.
Stop tag inventory operation by clicking:
a.
Click the Settings button
configured
b.
Click Save to apply the updated configuration (Cancel to revert
changes)
Click the reader name (under DATA SOURCES
•
Update reader settings as desired
Click Save to apply updated reader settings (Cancel to revert changes).
to change how inventory runs are
) to change reader settings.
© 2021, Impinj, Inc.
Advertisement
