Advertisement
HOW TO OPERATE THE FULL COVERAGE NECK MASSAGER
• Charge fully before first use.
• Remove necklace, jewelry, scarf, etc.
• Unclasp the magnetic buckles on the bands.
• Hold both ends and place the device on the back of your neck with the opening in front of your
chin (the control panel can be on either the right or left side).
• Close your eyes, lean back and relax.
• Use the control panel to turn the device on and control the features. (Note: The power button
has raised dots on it.)
Please note: the skin around your neck may become a little red after massaging. This is normal and
will quickly revert to normal.
ON/OFF BUTTON
• When the device is turned OFF, press On/Off to start up.
• When the device is turned ON, press On/Off to cycle through 3 different levels of intensity
— low, medium and high. Note: The default setting is LOW.
MODE BUTTON
Press and hold the Mode button to adjust how the massage head moves.
Mode 1 = Moving and rotating with heat ON
Mode 2 = Moving and rotating from front to back with heat OFF
Mode 3 = Moving and rotating from back to front with heat OFF
Note: The massage head may buzz when it rotates and changes position. This is not a sign of
defect or malfunction.
SWITCHING OFF
• After 10 minutes of use, you will hear a long beep. The power will then switch off automatically.
• To switch off manually, press and hold the On/Off button for more than 2 seconds, until you
hear a long beep.
USING THE BREO APP
The free breo app unlocks additional massage features, timers and more options. It is not
required for use, but it does give you more options and greater control.
Scan the QR code to download the app.
ANDROID
Or, go to the App Store or Google Play and search for the "breo" app. Follow the app
instructions to access additional features from your Full Coverage Neck Massager.
IOS
- 3 -
Advertisement
