Vello HANDY Series Erratum Of Installation And User Manual page 24

1
2
installation and user manual
6. user instructions
6.1 Preparation
• Check if the distribution box has any damages
or flaws. If this is the case, do not use the
distribution box and call for a qualified electro
technician to inspect it.
• Prevent faulty usage of the power distribution
box. Use the box according to the given specifi-
cations and respect the RDF and the protection
degree.
6.2 Connecting and disconnecting plugs
6.2.A IP44
• Before inserting the male plug into the
socket, make sure the piece of equipment
is switched OFF.
• Open the lid of the socket and insert the
male plug completely.
• The equipment is ready for use and can
be switched ON.
• Before removing the plug after usage,
switch OFF the equipment first.
• Lift the lid of the socket and remove the
plug bij pulling it's grip firmly.
6.2.B IP67
• Before inserting the male plug into the
socket, make sure the piece of equipment
is switched OFF.
• Open the lid of the socket and insert the
male plug completely.
• The bayonet ring must be fully turned
clockwise to reach the IP67 connection.
Schakel de verbruiker in.
• Before removing the plug after usage,
switch OFF the equipment first.
• Loosen the bayonet ring by turning it
counter clockwise.
• Lift the lid of the socket and remove the
plug bij pulling it's grip firmly.
− 24 −