Table of Contents
Advertisement
Change
Date
No.
1
05 AUG
2014
QAP20/003/B
Change Record
Title or Brief Description
Page 1-2 Figure 1-1 added new G2 regulator
Page 6-2 Figure 6-1 and Page 7-2 and Page 7-3 Table 7-2
added index 51 Qty 4 PN 670572 HI-COLLAR 1/4 LOCK
WASHER, SS, index 43 Qty (1) PN 550101 SET SCR 10-24
1/4 CP AS W/NYL was PN 550648 TUBE, Pilot, index 38
Qty (1) PN 550102 SET SCR #10-24 X 1/8" CP SS W/NYL
was PN 895289 SETSCREW, Hex Socket Head #10-24 X
5/16", index 47 added taped hole #6-32 , index 48 PN
550091 Qty (2) was (1) SET SCR 6-32X3/16 CUP SS
W/NYL was SETSCREW, Hex Socket Head #6-32 X 3/16"
Page 6-6 6-5.1 DISASSEMBLY OF OILER AND HOSE
ASSEMBLY was 6-4 DISASSEMBLY OF OILER AND HOSE
ASSEMBLY
Table 1-1 Page 1-1: 158 ft-lbs @ 50 psi to 876 ft-lbs @ 200
psi (214 N·m @ 3.44 bar to 1188 N·m @ 13.8 bar) was 27
ft-lbs @ 50 psi to 97 ft-lbs @ 200 psi (36.6 N·m @ 3.44 bar
to 132 N·m @ 13.8 bar), @ 40 psi was SCFM, 8.5 scfm (241
l/m) was 1.17 scfm (31.63 l/m), 19 scfm (538 l/m) was 6.1
cfm (154 l/m), 1000-1100 was 600-720.
Page 2-1: Deleted 5.2 cfm (137 l/m) at, 40 to 200 psi (2.8
bar to 13.8 bar) was 100 to 200 psi (6.9 bar to 13.8 bar).
Page 3-1: 1050 blows per minute at a 200 psi pressure with
consumption of 19 scfm (538 l/m) was 720 blows per minute
at a 100 psi pressure with consumption of 6.1 cfm (173 l/m).
Page 6-1: Remove set screw (38) and (43). Was Remove
set screw (38).
Page 6-5: install the screws with lock washers (51) was
install the screws.
Page 6-6: install setscrew (38) and (43) was install setscrew
(38)
Signature of
Validating Officer
SIGNATURE ON
FILE
Advertisement
Table of Contents
