Page 1
Ethernet Extender Pair VC-350PoE VC-350PoE Single Port PoE Ethernet Extender is a high-speed Ethernet transmission device. It can transmit Ethernet and Power signals together for PoE devices. It transmits data network signal up to 1,000 meters over any pair of 2-wire such as Cat5, coaxial cable, telephone line and power line, etc.
Page 2
◆ Max Transmission distance reach 1,000m (RVS 2×1mm ◆ Max physical bandwidth reach 200Mbps ◆ Support power supply over cable technology ◆ Transparent transmission, low power consumption and no adjustment ◆ Dip switch for power output: 12VDC/2A or PoE ◆ Built-in ESD protection circuit, in case of static damage Telephone line: Cat3 or above Power line: RVV / RVS / RVVP / RVB 2×0.5mm above...
Page 3
Operating Environment <95% (Non-condensation) Working Humidity VC-350PoE supports enhanced high speed network data transmission. The data differs from the cables types. Moreover, the longer distance of cable, the lower the transmission rate accordingly. The following testing details are for your...
Page 4
Master Slave Step Installation Instruction Step Installation Instruction Connect Cat5 cable to RJ45 terminal (1) of 2-wire cable connection terminal (12) master unit DC power output indicator (2) Ethernet transmission indicator (13) Power output mode dip switch (3) Power indicator (14) Lower voltage 12VDC power output terminal (4) DC power output indicator (15) PoE power output indicator (5)
Page 5
When you use VC-350PoE-2P, please follow the below tips as a reference, in order to reduce the fault in the process of using and the inspection work.
Need help?
Do you have a question about the VC-350PoE and is the answer not in the manual?
Questions and answers