Download Print this page

Gemini GWAP23 Manual page 6

Wifi smart hepa filter air purifier

Advertisement

OPERATING INSTRUCTION
Power ON/ OFF Touch Button
• Touch the power ON/OFF touch button to turn on the appliance, hear a
"beep" sound. And the default setting is High wind mode, the corresponding
wind speed indicator lights on.
• Touch the button again to turn off the appliance, the "beep" sound rings for
once and the appliance will turn off with all lights turn off.
Wind Speed Touch Button
• During the working, you will hear a "Beep" sound when you touch the wind
speed touch button each time. Touch the wind speed touch button to set
among the wind speeds of Auto-High-Sleep, and the corresponding white
indicator lights on.
• Auto mode means the wind speed will automatically adjust according to air quality.
• Red LED light ring - Bad air quality (default High wind speed setting automatically)
• Yellow LED light ring - Normal air quality (default Mid wind speed setting
automatically)
• Blue LED light ring - Good air quality (default Low wind speed setting auto-
matically)
• High Wind Mode: connect the power supply, the light ring will turn among
blue, cyan, green, yellow, red, purple. After around 30 seconds, the appliance
will detect automatically based on detect air quality to display the air quality
condition, the LED light ring (Blue/Yellow/Red), but the wind speed keeps at
high wind mode.
• Sleep Mode: runs at low wind speed, the LED light ring will at the purple
gradient for about 3 seconds, then the appliance will detect the air quality
automatically by the detect air quality sensor to display the LED light ring
(Blue/ Yellow/ Red), if no operation for about 5 seconds, all light ring will be
off. Press any button can wake up the light.
LED Light Touch Button
• During the working, touch the LED ring light touch button, hear a "Beep"
sound, and to set Soft light or Bright light mode of the LED light ring.Touch
the button again, hear a "Beep" sound, the LED light ring turn off completely.
NOTE: The LED light button can not operate in the status of shutdown.
Timer Off/ WiFi Setting Touch Button
• During the working, touch the Timer off touch button to set among the circulation
of 4H and 8H timer off with a "Beep" sound, and the corresponding white
indicator lights on.
• Touch again, the timer indicator turns off and the appliance will work
continuously without timer setting.
• In the status of timing the appliance begins to count down. When time is up,
the fan will stop working and all lights and appliance will be off.
/
6

Advertisement

loading