Honda WW125A Manual page 62

When the ignition switch is pressed, the
u
Honda SMART Key indicator and ignition
switch ring go off, and the buzzer
sounds. When they light again, do the
next input.
When the answer back/alarm button is
u
pressed, the Honda SMART Key LED
comes on. Make sure the LED goes off
before pressing the button again.
When the answer back/alarm button or
u
ignition switch is not pressed for 1
minute, the Honda SMART Key indicator
and ignition switch ring flash 3 times,
and then the buzzer sounds and the
mode is cancelled. Return to
the procedure again.
If you press the answer back/alarm
u
button the wrong number of times
before you repeat the procedure 3
times, then repeat the procedure 3 times
again.
Press the answer back/alarm button to
f
select from 3 sensitivity levels.
3 alarm rings: high sensitivity
2 alarm rings: medium sensitivity
1 alarm ring: low sensitivity
The Honda SMART Key indicator and
ignition switch ring come on while setting.
Press and hold the ignition switch for more
g
than 2 seconds. The sensitivity level is set.
u
u
and do
c
The Honda SMART Key indicator and
ignition switch ring turn off, and a buzzer
sounds once.
When the answer back/alarm button is
not pressed for 10 seconds, the Honda
SMART Key indicator and ignition switch
ring flash 3 times, and then the buzzer
sounds, and the sensitivity level is set.
Continued
59