Advertisement
5. mAinTenAnce
5.1.
When the vice is not in use, the front jaw should be screwed in so that it is just touching the back jaw.
5.2.
Keep the vice clean and lubricate all moving parts with oil/grease on a regular basis.
5.3.
Before each use check the vice is securely mounted on the work surface and inspect for any visible damage. if any suspect item is
found, remove vice from service and take the necessary action to remedy the problem.
enviRonmenT pRoTecTion
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7AR
01284 757500
© Jack sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AsV100, 125, 150, 200, 250, 300 (H3f) issue 4 14/12/17
Advertisement
