Advertisement
Description
"A" Frame Sub Assembly
Bottom Cross Bar
Intermediate Cross Bar
Top Cross Bar Fabrication
Telescopic Uprights
M8 Fixings c/w Nuts & Washers
M6 Phillips Machine Screws c/w Nuts & Washers
Latch Shoulder Screw c/w M5 Nuts & Washers
M5 Phillips Machine Screws c/w Nuts & Washers
Check contents from list and identify using "Trestle Assembled" pictures on previous page. In the unlikely event of a missing component please
contact your Jack Sealey Limited dealership.
4. SPECIFICATIONS
Model No:.............................................FDT3.V2
Capacity:...................................................200kg
Minimum Working Height:.......................800mm
Maximum Working Height:....................1300mm
Cross Bar Width:.....................................690mm
Width Between Stops:.............................650mm
Storage Folded Depth:............................150mm
5. ASSEMBLY
5.1
Assembly Method & Tools:
5.1.1
13mm spanner, 10mm spanner, 8mm spanner and Phillips screwdrivers for M6 & M5.
5.1.2
Fit intermediate cross bar to pre-assembled "A" frames (NB! diagonally opposed latch positions). Do not fully tighten fixings.
5.1.3
Fit bottom cross bars to "A" frames. Do not fully tighten fixings.
5.1.4
From diagrams below, firstly latch (Fig 1) and then "over centre" lock (Fig 2) "A" frame both sides. Tighten all screws.
5.1.5
Sub assemble telescopic uprights to top cross bar (M8 fixings). Fit with interference "Pips" outermost and do not fully
tighten fixings.
5.1.6
Lower sub assembled telescopic uprights into "A" frames and intermediate cross bar guides. This will require a small
force as the interference "Pips" pass through the guides.
5.1.7
Insert "dog legged" pin through any of the holes in the telescopic uprights. Rotate pin to the "safe" retained position.
Tighten top cross bar fixings. With "A" frames latched and locked both sides, height set, the trestle is ready for use.
Fig 1
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited 2012
Qty
2
2
1
1
2
8-sets
8-sets
2-sets
2-sets
Latch
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Fig 2
"Over Centre" Locked
01284 757500
01284 703534
Latched
www.sealey.co.uk
Web
sales@sealey.co.uk
email
FDT3.V2
Issue No: 1 - 16/08/12
Advertisement
