Advertisement
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
The use of symbols in this document is to attract your attention to possible danger. The symbols and warnings themselves do not eliminate any danger, nor are they substitutes for proper
accident prevention measures.
1. SAFETY INSTRUCTIONS
1.1.
ELECTRICAL SAFETY
FWARNING!
You must
Electricity at Work Act 1989
Health & Safety at Work Act 1974
Important:
DO NOT
DO NOT
DO NOT
a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to the live terminal ‘L’.
c) Connect the BLUE neutral wire to the neutral terminal ‘N’.
d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that the cable outer insulation
extends beyond the cable restraint and that the restraint is tight.
1.2
GENERAL SAFETY
F WARNING!
!
!
!
!
F WARNING! Before each use check that drill/chuck/cutting tool is secure and that it is not worn or damaged. If worn or damaged replace
immediately.
F WARNING!
!
F WARNING!
!
!
!
!
!
If in any doubt about electrical safety, contact a qualified electrician.
dispose of the plug safely.
DO NOT
Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
MINI DRILLING/MILLING MACHINE
SM2502
Yellow & Green
Earth Wire
Blue
Neutral
Wire
FUSE RATING 5 AMP
Brown
Live
Wire
Cable
Restraint
Advertisement
