Tascam Mixcast 4 Reference Manual page 31

Voice Changer switch
Tapping this will open a confirmation message. Tap "OK" to close
the message.
Tap "OK" to turn the switch on and enable the Voice Changer
settings.
The Voice Changer function can make voices sound lower or
higher by adjusting the pitch.
Use the slider and the [-] and [+] buttons to adjust the voice.
o Reverb manual settings
Reverb Manual Setting Screen
Tapping one of the Reverb Manual setting icons selects it,
highlighting it and activating that setting.
o Room Type selection
Tap the desired Room Type from among the following to
select it.
o Hall : Reverb sound like a concert hall
o Room : Reverb sound like being in a room
o Live : Reverb sound like being in a live perfor-
mance venue
o Studio : Reverb sound like being in a studio
o Plate : Reverb like that made by a plate reverb
o Reset
Tap this to restore changed settings to default values.
o Bypass
Tap to bypass the reverb effect.
Use the slider and the [-] and [+] buttons to adjust the levels of
the following setting values.
o Reverb Time
This sets the time reflections and reverb sound are output.
The larger the value, the longer they continue.
o Pre Delay
This adjusts the amount of time before the reflections and
reverb sound start. The larger the value, the larger the
reverberations make the room sound.
o Diffusion
This adjusts the density and width of the diffusion of the
reflections and reverb sound.
8 - Touchscreen Functions
2 USB settings
Tap the icon to open the Level Screen.
Level Screen
` USB input level
Adjust the device connected by USB so that the volume is not too
high or low and the peak stays in the orange range on the level
meter.
1 Voice settings
Tap to open the Voice Setting Screen.
Voice Setting Screen
Processing switch
Tap to select one of the following Processing settings.
o De-esser : Adjust harsh high-frequency sibilant sounds.
Tap to show the
o Tapping the icon again will make the
setting icon disappear.
o Noise Suppressor : The range of noise that is blocked can be
adjusted.
Tap to show the
o Tapping the icon again will make the
setting icon disappear.
* Tap the settings icon to open the De-esser Manual Setting Screen
or Noise Suppressor Setting Screen (page 32).
Scene
Tap to select one of the following Scene settings.
o Off : The sound is not processed.
o Talk : This evens out the sound of voices to make speaking
easier to hear.
o Music : This provides clear music playback.
settings icon. *
settings icon. *
31
TASCAM Mixcast 4