HP 11049A Operating And Service Manual page 18

Model 11051A's with serial numbers 416-00275 and above have an added
1.
resistor R3 in series with the thermoelement input.
W
two 10 \1, 1%, 1/8
is added to adjust the nominal 7. 5
all instruments; it is added only to adjust out-of-tolerance outputs.
2. On page 2, at bottom of page, change output relationship to
% input change '"
20 September 1968
MANUAL CHANGES
MOD E L 11049A/ll050A/ll051A
-hp- Part Number 11049-90000
resistors (-hp- Part No. 0757-0346) in parallel and
111
V output.
t.. Edc
1. 7 E dc
R3 is made up of
R3 may not be present on
x
100.
11049 -90000