Advertisement
Test Certificate No.
QCC/07-B
Health & Safety at Work Act 1974. Docks Regulations 1934, regulations 18(a) & 22(a) SR & O 1934 No 279.
CERTIFICATE OF TEST AND EXAMINATION OF LIFTING DEVICES
AND THEIR ACCESSORY GEAR, BEFORE BEING TAKEN INTO USE
MODEL NUMBER
DESCRIPTION OF LIFTING
DEVICE AND SERIAL NO. (IF ANY)
HYDRAULIC MOTORCYCLE LIFT
MODEL NUMBER: MC401
SERIAL NUMBER:
COMPANY CONDUCTING TEST:
This test was commissioned by Jack Sealey Limited, Kempson Way, Suffolk Business Park, Bury St. Edmunds,
Suffolk, 1P32 7AR and was undertaken by Changshu Tongrun M & E Co. Ltd., the manufacturer of the product
in China and the holder of the construction file. This certificate is signed by the Chief Engineer for the
manufacturer. We hereby certify that the motorcycle lift covered by this test certificate has been tested to 25% overload
and the safety valve has been set at the rated working capacity. This product was manufactured in China and product
liability insurance is in effect within the U.K. through the Axa Insurance Company (policy number available on
request).
ENGINEER CONDUCTING TEST . . . . . . . . . . . . . . . . . . . . . . . . . . .Chief Engineer
DATE:.................................
HEALTH AND SAFETY EXECUTIVE
Form prescribed by the Secretary of State for
MINIMUM
Sole UK Distributor,
Sealey Group,
Bury St Edmunds,
Suffolk.
MAXIMUM
LIFTING
LIFTING
HEIGHT
HEIGHT
MM
MM
760
180
Changshu Tongrun M & E Co. Ltd.
China Manufacturer No:...........................
PROOF
MAXIMUM
LOAD
LOAD
APPLIED
KG
400
Phone: 01284 757500
Fax:
01284 703534
KG
500
ISSUE 3 - 220403
Advertisement
