Download Print this page
Atlantis A14-SC920-OUT Manual

Atlantis A14-SC920-OUT Manual

Wi-fi smart motor camera

Advertisement

Available languages

Available languages

Quick Links

Thank You for choosing Wi-Fi Smart Motor Camera
Thank You for choosing an Atlantis Product. For more detailed instructions on configuring and using
the device, please refer to the online manual (www.atlantis-land.com).
System Requirements
Before installing this device, please verify the following points:
 Mobile device Apple (running IOS
download app from Play Store) with 3G/4G/LTE connection.
 Broadband internet connection (cable, DSL, etc.) and an existing Wi-Fi (2.4Ghz) network.
Package contents
Unpack the package and check all the items carefully. Also, keep the box and packing materials in
case you need to ship the unit in the future. The package should contain the following items: Smart
Wi-Fi Camera, AC/DC Adapter (12V@1A) and cable, Wall mount kit, MultiLanguage Quick Start
Guide and Warranty Card.
If any item contained is damaged or missing, please contact your local dealer as soon as possible.
Mounting
Smart WiFi Cam can be mounted to the wall with the wall-anchoring kit. Anchor the support on the
wall by using the screws and and finally connect the plug.
Use of audio or video equipment for recording the image or voice of aperson
without their knowledge and consent is prohibited in certain states
orjurisdictions. Nothing herein represents a warranty or representation that
the Atlantis product provided herein is suitable for the end-user's intended
use under the applicable laws of his or her state. Atlantis disclaims any liability
whats oever for any end-user use of the Atlantis product, which fails to
comply with applicable state, local, or federal laws.
This manual is for multiple devices. Certain features described may only be
available on specific models.
For technical questions and support, please contact our help-desk by ticket
on http://www.atlantis-land.com/ita/supporto.php.
For generic informations, please send an e-mail to info@atlantis-land.com.
AC/DC Adapter:
Risk of electric shock. Do not disassemble.
Product for indoor use.
If the product is damaged, take it to a service center or do not use/repair it
and throw it in the appropriate containers for disposal.
Keep out of the reach of children.
Do not use the product near heat sources. Do not wet. Do not immerse in
water. Use a damp cloth to clean.
Use only the voltage required for the device, as indicated on the product and
in this manual.
Observe the conditions of use indicated in this manual.
Smart Camera:
When the product is turned on, please keep a minimum distance of 20cm
from the product (exposure to radio frequencies).
The Smart Camera can be installed in an outdoor environment (for example
a balcony) but must be protected from direct atmospheric agents (not
exposed to water). IP65 protection (EN 60529: 1991 + A2: 2013 + AC: 2019)
guarantees complete protection against dust and splashes of water.
®
8 or higher) or Android
TM
1
(6.0 or higher and able to
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the A14-SC920-OUT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Atlantis A14-SC920-OUT

  • Page 1 Thank You for choosing Wi-Fi Smart Motor Camera Thank You for choosing an Atlantis Product. For more detailed instructions on configuring and using the device, please refer to the online manual (www.atlantis-land.com). Use of audio or video equipment for recording the image or voice of aperson without their knowledge and consent is prohibited in certain states orjurisdictions.
  • Page 2 Ensure that the devicel is securely anchored to the wall (in order to prevent the Smart WiFi Cam from falling). The lens must not be exposed to direct sunlight. Connect the adapter to the Smart camera. The Smart camera (after about a minute) should start playing the message: "Wait for WiFi Config!".
  • Page 3  Tuya app will show you the network that you are currently connected to, which is the same that the Smart Plug will connect to. Tap Change Network in order to select another wireless network.  Enter, if not already present, the wireless network access password. ...
  • Page 4: Control Devices

    Control devices  Tap My Home[ ] then All Devices. The app will display all the devices connected to the account  Tap a device for control it and view the video stream. You can know immediately know the quality of the wireless signal, listen to what was captured by the camera microphone, select the SD/HD video stream and switch to full screen [ ...
  • Page 5: Montage

    Pour tous problèmes ou renseignements vous pouvez contacter le service d’assistence web d’Atlantis http://www.atlantis-land.com/ita/supporto.php. Pour avoir des info vous pouvez contacter info@atlantis-land.com. Website: http://www.atlantis-land.com, Email: info@atlantis-land.com Besoin système Avant de commencer l’installation vérifiez si vous disposez des suivants requis: ...
  • Page 6 Connectez l'adaptateur à la Smart caméra. La Smart caméra (après environ une minute émettra 3 beeps) devrait commencer à reproduire le message: "Wait for WiFi Config!".  La caméra démarre et émet 3 bips après environ une minute.  Après le démarrage de la caméra, lorsqu'elle n'est PAS configurée, lit le message vocal suivant: "Wait for WiFi Config!".
  • Page 7  Entrez, s'il n'est pas déjà présent, le mot de passe d'accès au réseau sans fil.  Appuyez sur Suivant.  Scannez le code QR avec la caméra.  Appuyez sur j’ai entendu le bip sonore lorsque l'appareil lit le message vocal "Connect Router".
  • Page 8  Cliquez sur Ma Famille[ ], cliquez sur Tous les appareils et puis selectionnez la caméra pour ouvrir l’interface de contrôle.  Appuyez sur une caméra pour la contrôler et afficher le flux vidéo. Vous pouvez immédiatement connaître la qualité du signal sans fil, écouter ce qui a été capturé par le microphone de la caméra, sélectionner le flux vidéo SD / HD et passer en mode plein écran[ ...
  • Page 9: Montaje

    Esta guía de instalación rápida le permite instalar y configurar Smart Wi-Fi Cam sin usar una computadora. El manual completo esta disponible en el sitio web (www.atlantis-land.com) en la página del producto, donde te guiamos paso a paso para la instalación.
  • Page 10 Conecte el adaptador a la Smart Cámara. La cámara (después de aproximadamente un minuto emitirá 3 pitidos) debería comenzar a reproducir el mensaje: "Wait for WiFi Config!".  La cámara se inicia y emite 3 pitidos después de aproximadamente un minuto.
  • Page 11  Presione Oír el tono de aviso cuando la cámara reproducirá el mensaje de sonido: "Connect Router". Presione No se oye nada y luego sigue las instrucciones.  La sincronización del producto tomará 30 segundos. Se mostrará un contador para indicar el estado de la sincronización (por favor, alcance el 100%).
  • Page 12  Haga clic en Mi hogar [ ] y Todos los dispositivos y seleccione la cámara para abrir la interfaz de control.  Toque una cámara para controlarla y ver la transmisión de video. Puede conocer de inmediato la calidad de la señal inalámbrica, escuchar lo que ha capturado el micrófono de la cámara, seleccionar la secuencia de video SD / HD y cambiar al modo de pantalla completa [ ...
  • Page 13 Smart Wi-Fi Cam Vielen Dank, dass Sie sich für ein Atlantis-Produkt entschieden haben. Ausführliche Anweisungen zur Konfiguration und Verwendung des Geräts finden Sie im Online-Handbuch (www.atlantis- land.com). Dieses Handbuch gilt für mehrere Geräte. Bestimmte beschriebene Funktionen sind möglicherweise nur bei bestimmten Modellen verfügbar.
  • Page 14  Wenn die Kamera nach dem Booten konfiguriert ist, aber keine Verbindung zum Router herstellen kann, wird die folgende Sprachnachricht abgespielt: "Router connect Fail!".  Zurücksetzen: Zurücksetzen durchzuführen, muss eingeschalteter Kamera die Taste etwa zehn Sekunden lang gedrückt werden, bis die Kamera die Sprachnachricht "Reset, camera reboots" wiedergibt.
  • Page 15  Tippen Sie Witer.  Scannen Sie den QR-Code mit der Kamera.  Tippen Sie auf Signalton gehört, wenn das Gerät "Connect Router" ausgibt. Und Sie können die Konfiguration ungefähr 30s abschließen. Tippen Sie auf Nichts wird gehört und folgen Sie den Anweisungen.
  • Page 16: Appendix A: Technical Details

    Appendix A: Technical Details Model A14-SC920-OUT Release Rel 21.0 Image Sensor 1/2.7 CMOS (min Illumination 0.1lux/F1.2) Lens Fixed, 4mm Angle 85° Horizontal Resolution 2MP (1920 x 1080) Full HD Compression H.264 for Video (up tp 2Mbps), G.711 for Audio Wireless Interface Wifi 2,4Ghz, EIRP<100mW with WPA-PSK/WPA2-PSK and AES128Bit...

This manual is also suitable for:

Smart motor camera