Overview The Prime HDR Micro Bullet IP Camera is a compact camera with easy setup design. PoE is supported to reduce complicated cabling without sacrificing performance. 4 Megapixel Resolution is supported to provide superior details; in the meantime, Quad Streams Compression (H.264 Baseline / Main / High Profile + MJPEG) is available for efficient bandwidth and storage management.
Package Contents Please check the package containing the following items listed below. Indoor Prime HDR Micro Bullet IP Camera M3 Machine Screw x 1 with Fixed Lens Quick Guide (bundled software and documentation) NOTE: To purchase power adaptor, please contact the camera manufacturer for further information.
Page 5
Outdoor Prime HDR Micro Bullet IP Camera Prime HDR Micro Bullet IP Camera with Fixed Lens with Vari-Focal Lens / Motorized Lens / Smart Focus Lens* Self-Tapping Screw Plastic Screw Anchor (x5) (x5) Quick Guide (bundled software and documentation) *Optional NOTE: To purchase power adaptor, please contact the camera manufacturer for further information.
Connectors (Indoor Only) Connector Definition RJ-45 For network and PoE connections Network LEDs For network connection and activity indication. Alarm Out − Alarm In − Alarm I/O * Alarm Out + Alarm In + Power Jack (DC 12V) Power connection Audio I/O Two-way audio transmission For analog videos output...
microSD Card Slot / Default Button The positions of the microSD card slot and the default button are shown as below. Fixed Lens Vari-Focal Lens / Motorized Lens / Smart Focus Lens* *Optional microSD Card Slot Insert the microSD card into the card slot to store videos and snapshots. Do not remove the microSD card when the camera is powered on.
Camera Cabling Before users connect cables, make sure that all cables and the power adaptor are placed in dry and well-waterproofed environments, e.g. waterproof boxes. The purpose is to prevent moisture accumulation inside the camera and moisture penetration into cables, which might lead to camera breakdown. Please follow the instructions below to complete IP camera connection.
Waterproof Cable Connectors Follow the instruction below to waterproof the connectors of different types of cables. The supported cables are as shown below. RJ-45 & DC 12V Cable RJ-45 Cable IP66 RJ-45 Cable RJ-45 & DC 12V Cable Follow the steps below to waterproof the connectors of the RJ-45 & DC 12V cable.
Page 12
RJ-45 Cable Follow the instruction below to waterproof the connector of the RJ-45 cable. Plug the Ethernet cable to the connector of the RJ-45 cable and coat the joint with silicone gel. Make sure there is no gap between the Ethernet cable and the connector;...
Installation (Outdoor Only) Please read the instructions provided in this chapter thoroughly before installing the camera. Ceiling / Wall Mounting The camera can be installed directly on a wall or ceiling with the integrated 2-axis adjustable Bracket Mount. Please note that the wall or ceiling must have enough strength to support the camera.
Page 14
Step 4: Match the two screw holes of the camera with the plastic screw anchors at the installation location. Insert the plastic screw anchors into the two drilled holes, and then fasten the camera with the supplied M4x31 self-tapping screws. Step 5: Use a cross screwdriver to loosen the screw indicated in the right figures but do...
System Requirements To perform the IP camera via web browser, please ensure the PC is in good network connection, and meet system requirements as described below. Items System Requirement Minimum : 1. Intel® Core i5-2430M @ 2.4 GHz 2. 4 GB RAM Personal Computer Recommended : 1.
Access Camera For initial access to the camera, users can search the camera through the installer program: DeviceSearch.exe, which can be found in “Device Search” folder on the supplied CD. Accessing the Camera by Device Search Software Step 1: Double click on the program Device Search.exe. Step 2: After its window appears, click on the <Device Search>...
Page 17
Step 8: A prompt window requesting for default username and password will appear. Enter the default username and password shown below to login to the camera. Login ID Password Admin 1234 NOTE: ID and password are case sensitive. NOTE: It is strongly advised that administrator’s password be altered for the security concerns.
Page 18
Once the Viewer is successfully installed, the Home page of the IP camera will be displayed as the figure below. NOTE: For more details about the function buttons on the Home page, please refer to the Prime HDR IP Camera Menu Tree on the supplied Fixed Lens Models / Vari-focal Models...
Page 20
Motorized Lens Models Zoom & Focus Adjustment (Motorized Lens / Smart Focus Lens Only) The live image will be displayed on the Home page when the camera is successfully accessed. If zoom or focus is not at the desired position, please use the function buttons on the Home page for adjustment.
Setup Video Resolution Users can setup video resolution on Video Format page of the user-friendly browser-based configuration interface. Video Format can be found under this path: Streaming> Video Format. The default value of video resolution is as below. H.264-1920 x 1080 (30/25 fps) + Normal Mode H.264- 720 x 480 (30 fps) / 720 x 576 (25 fps) H.264- 1920 x 1080 (30/25 fps) +...
Configuration Files Export / Import To export / import configuration files, users can access the Maintenance page on the user-friendly browser-based configuration interface. The Maintenance setting can be found under this path: System> Maintenance. Users can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the IP camera.
Tech Support Information This chapter will introduce how to delete previously-installed Viewer in the PC and how to setup the Internet security. Delete the Existing DCViewer For users who have installed DCViewer in the PC previously, please remove the existing DCViewer before accessing the IP camera. Deleting the DCViewer Activate the <Control Panel>, and then double click on <Add or Remove Programs>.
Setup Internet Security If ActiveX control installation is blocked, please either set Internet security level to default or change ActiveX controls and plug-ins settings. Internet Security Level: Default Step 1: Start the Internet Explorer (IE). Step 2: Click on the <Tools> tab on the menu bar and select <Internet Options>.
Need help?
Do you have a question about the MPV-QJ-SD and is the answer not in the manual?
Questions and answers