Advertisement
T H E
The Compact Reference Series incorporates the highest quality materials, the latest acoustic technology, and new
state-of-the-art molding techniques, and are capable of unusually high performance. These speakers are fully
compatible with home theater systems. Each model features MagnaGuard
speaker 's magnetic field will not distort the TV's image or damage the picture tube, allowing placement next to a
television or computer monitor.
H O W
Correctly wiring your speakers is important for achieving the best sound quality and a rich stereo image. Wiring
should take just a few minutes, but it's important to do it carefully, since incorrect wiring (such as reversed
connections) can result in a poor stereo soundstage or poor bass.
We recommend 18 gauge wire or thicker for runs up to 25 feet (8 meters) and 16 gauge wire or thicker for longer
runs. Separate the first few inches of the wire conductors. Strip off
speaker wire to expose the two conductors and tightly twist the wire strands.
Warning:
To prevent electrical shock hazard, always switch off the amplifier or receiver when making connections to
the speaker.
Using the five-way
binding posts: The
binding posts permit
easy connection to
banana plugs, spade
lugs, and bare wire.
The metal surfaces are
plated with 24k gold
to prevent corrosion.
Insert the wire into the hole and tighten.
H O O K U P
When making all connections, be sure to connect + to +
(red) and – to – (black). Connect the speaker terminals to
the amplifier speaker outputs.
C H E C K I N G
It is critical that your speakers are hooked up with similar polarity or "in phase." A simple listening test will tell you if
the speakers are connected properly. Place the speakers face-to-face, as close as possible. While listening to music
with your amplifier set to MONO, reverse the connections at one speaker only. You'll hear a dramatic change in
sound. The connection that yields the fuller bass and louder sound is the correct one.
C O M P A C T
T O
C O N N E C T
T H E
R E F E R E N C E
magnetic shielding. This ensures the
®
Y O U R
-inch (12mm) of insulation from the ends of each
1
/
2
Important: Typically, one side of
the wire is smooth. Connect this
side to the – (black) connection.
The other side has a rib or stripe.
Connect this to the + (red)
connection.
Boston
Back of amplifier or receiver
C O N N E C T I O N S
S E R I E S
S P E A K E R S
Boston
Hide quick links:
Advertisement
