Parts Supplied - MAGUIRE MPL Series Installation Operation & Maintenance

M P L M L S e r i e s V e n t u r i

PARTS SUPPLIED

All MODELS:
1. Aluminum VACUUM GENERATOR, mounts directly to the material pickup lance.
2. MATERIAL PICK-UP LANCE.
3. MATERIAL TRANSFER LINES:
a) Suction line (12 feet of 1 inch flexible hose).
b) Material pick-up lance (aluminum).
4. AIR LINE (Plastic) to connect the air solenoid to the Vacuum Generator.
5. HOPPER LID PARTS:
On MICRO blender series, (ML-1M), a complete new lid is provided with
filtered receiver box.
All others, a PELLET DEFLECTOR box is provided to mount inside the
hopper lid to accept the inflow of material.
6. SENSOR MOUNT (red polypropylene) installs in the hopper or lid.
7. LEVEL SENSOR, fits into the sensor mount.
8. CONTROL BOX, varies depending on model. (none for model MPL)
MPL, MPL-A, MPL-AS only:
1. Steel SUPPORT BAR with:
a) Air solenoid valve
b) Air pressure gauge
c) Low Level sensor
MPL-A, MPL-AS only:
1. Controller mounting bracket, included if loader control is attached to a WSB additive
feeder.
PACKAGED for SHIPPING:
ALL models:
MPL series:
ML series:
L o a d e r s 
The PICK-UP lance is shipped in one carton.
All remaining parts are shipped in one additional carton.
The controller is in one carton.
Parts for each venturi loader are shipped one additional carton per loader.
M A G U I R E P R O D U C T S , I N C .
6