System Shutdown - Ethicon Endo-Surgery ULTRACISION HARMONIC SCALPEL Generator 300 User Manual

User Manual
3

System Shutdown

1
2
3
4
5
10
If the system senses a generator, hand piece, or instrument fault during use, an audible alarm
(tone with long pulses) will sound and a visual alarm indicator will appear on the control
panel. (Refer to Chapter 4 – Troubleshooting or the Troubleshooting Guide to resolve the
problem.)
Warning: Place the generator in Standby mode before removing or replacing an instrument,
hand switching adaptor or hand piece or when the system is not in use.
Turn the generator power switch off and remove power cord from outlet.
Disconnect the hand piece, instrument, and adaptor or hand switching adaptor (if used) and
process them as indicated in their respective package inserts.
Clean the generator and cart and disinfect the foot switch(es) following hospital protocol (for
recommendations, refer to Chapter 5 – Cleaning and Disinfection).
Store foot switch(es) on the cart shelves provided. Each shelf will hold one foot switch.
Wrap foot switch cable(s) and the power cord on the cart's back handle for storage.
GEN04