Configuration
Add another route? [y/n]
What do you want to call
this device?
Set NTP server []
Running bootstrap to configure the appliance
Table 5: Setup wizard
Configuration
Access EDR appliance
console.
Upload License
SMTP Settings
SMTP Server and Port
Appliance Email
Authorize
Create an Administrative
account
Logon name
Display name
User email address
Description
Yes to configure an additional IPv4 static
route. No to go to the next prompt.
You can configure up to three IPv4 static
routes in bootstrap. You can configure
additional static routes in the EDR appliance
console.
The name to identify this system in the EDR
appliance console. Letters, numbers, spaces,
periods, and hyphens are allowed, and the
name can be up to 50 characters.
The IP address or FQDN of the NTP server.
Setting an NTP server ensures that the
appliance has an accurate time to indicate
when detections occurred.
Description
This is the static IP for the management port
that was specified during bootstrap.
You must upload a license before the
Symantec EDR device is functional. You
cannot use Symantec EDR after initial
installation without a license. No grace period
exists.
Symantec strongly recommends that you specify the SMTP settings in the setup wizard. Doing so lets
you recover a lost password. Otherwise, you can check Skip adding SMTP server configuration and
specify the settings later in the EDR appliance console.
The fully qualified domain name and port
number of the secure mail server.
The email address where alerts, such as a
license expiration notification, are sent from.
If your mail server requires a secure logon
to receive messages, type a user name and
password that Symantec EDR can use to
authenticate with the mail server.
These are the login credentials for the initial administrator account. You need this logon to complete the
setup wizard.
This administrator can create additional user accounts, including additional administrator accounts.
Initial administrator logon name
The initial administrator's display name as it
appears in the EDR appliance console.
The initial administrator's email address for
notifications.
Symantec
™
Endpoint Detection and Response 4.5 Installation Guide for the S550
________ yes (up to three supported)
________.________.________.________
________.________.________.________
________.________.________.________
________ no
__________________________________
________.________.________.________
________.________.________.________
Symantec EDR license location:
______________________________________
________.________.________.________
___________________@_____________._____
User name:
_______________________________
Password:
Provide this information to the administrator installing the
appliance in a secure method.
Ensure that the password is retained in a secure location
for archival purposes.
_______________________________
_______________________________
____________________@____________._____
Value to input
Value to input
appliance
10
Need help?
Do you have a question about the Symantec S550 and is the answer not in the manual?